At A Glance…
- Removes previously applied oils including teak oil from any wood surface
- Restores the natural colour of the wood
- Gel consistency will not run making it ideal for vertical surfaces
- Prepares wood for a new coating, improving penetration and adhesion
- Suitable for environmentally sensitive areas
DESCRIPTION
Properties
- Removes teak and other oils from all woods blackened by UV rays.
- Gel consistency.
- Ready to use – Easy Application
- Oils are dissolved in water.
- Ready to use.
- Easy application.
- Does not contain solvent or paraffin.
- Biodegradable.
Where to use
Apply direct on wood : outdoor furnitures, caillebotis, decks. Except oak, chesnut
Directions
Apply a thick layer of Aquanett to surface to be stripped.
Allow to stand 5 minutes max.
Apply 2nd application as soon as wet look of 1st application has disappeared and allow to penetrate (15 – 20 minutes)
Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar).
Using hot water makes stripping easier.
Always neutralise surface after with Net-trol.
Specifications
| Coverage: | 4m² per litre |
| Tools: | Synthetic brush/scrubbing brush, roller with synthetic cover |
| Suitable for: | Exterior use |
| Clean up: | Water |
| Working Time: | Up to 5 mins |
| Suitable Surfaces: | All exterior wood coated with wood oils |
IMPORTANT: Always neutralise after with Net-Trol
Reviews
There are no reviews yet.